Summary written by USA Jobs 24 from Analog Devices' advert and our data on 17,030 current US jobs. How we check every job
At a glance
Analog Devices is hiring a Staff Engineer, Facilities Engineering in Wilmington, MA. It is a full-time role in Software & IT, asking for at least 5 years of experience, first listed on November 4. The advertised pay is $109,600–$150,700 a year. The description mentions Excel and AutoCAD. Analog Devices has 99 other openings in the US, 36 of them in Wilmington, MA. Across all employers on USA Jobs 24 there are 13 Software & IT openings in Wilmington, MA today; the typical one asks for 5 years and advertises about $130,000 a year at the midpoint.
How the pay compares
Analog Devices advertises $109,600 to $150,700 a year, a midpoint of $130,150 a year. Where an offer lands in a range usually depends on experience and on the exact location. That is lower than about 79% of the 188 software & IT jobs in Massachusetts that publish a yearly rate on USA Jobs 24, where the typical midpoint is $178,000 a year. To see roughly what this leaves after federal and Massachusetts tax, try our take-home pay calculator.
Skills in this advert
How often each skill named in this advert appears across the 4,670 software & IT jobs we list today. Excel is the most widely requested (5% of jobs), while AutoCAD is the least common (1%). Widely requested skills are what employers expect as a baseline; rarer ones show what is special about this job.
Paste your resume and this advert into our resume match tool to see which of these words your resume already covers.
Before you apply
- Check it is still open. We found this job on Analog Devices' Workday site on November 4 and checked it again November 4, 5:17 AM ET. When an employer takes a job down, we remove it at our next daily update.
- Check the location works for you. This role is based in Wilmington, MA. If you would need to move, ask whether relocation help is offered.
- Match the experience. The advert asks for at least 5 years of experience. If you are a little short, a close match on the skills in the advert can still win an interview.
- Tailor your resume. Use the advert's own words, such as Excel and AutoCAD, wherever they are true for you. Our resume guide shows how.
- Know your number. Decide the lowest offer you would accept before the first call. Our salary negotiation guide explains how to ask for more.
- Apply only through Analog Devices' own site. Our Apply button goes straight to Analog Devices' Workday page. If anyone contacts you about this job and asks for money, gift cards or bank details, stop and check it with our scam checker. Read how to spot a fake job offer.
About hiring at Analog Devices
Analog Devices has 100 openings on USA Jobs 24 today across 11 states. Most are in software & IT (44), hardware & chips (18) and engineering & mfg (10). The biggest locations are Wilmington, MA (37), San Jose, CA (19) and Durham, NC (10). None of them is fully remote, 6% are open to entry-level candidates and 84% show pay. We collect Analog Devices' jobs every day straight from its own careers system (Workday), never from job boards or agencies.
The employer's advert
This is Analog Devices' own description of the job, copied word for word from its careers site. We have not edited it.
Show the full advert from Analog DevicesHide the advert921 words
About Analog Devices
Analog Devices, Inc. (NASDAQ: ADI) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, AI, and software technologies into solutions that combat climate change, reliably connect humans and the world, and help drive advancements in automation and robotics, mobility, healthcare, energy and data centers. With revenue of more than $11 billion in FY25, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at www.analog.com and on LinkedIn and X.
The Facilities Operations team at Analog Devices is currently seeking an experienced engineer to support facilities equipment installation, troubleshooting, and project construction for site locations in Wilmington and Chelmsford, MA. This role will be based out of Wilmington, MA. The role requires a skilled engineer, capable of solving mechanical and/or electrical system capacity and resiliency. The candidate will operate as an interface between 3rd party engineers supporting larger construction projects as well as supporting day-to-day issues as they arise related to the mechanical and/or electrical infrastructure. They will play a leading role in defining process and mechanical and/or electrical system standards and requirements. The candidate will lead ADI’s environmental and sustainability goals from a facilities infrastructure perspective. This role reports to the Director of Facilities Operations.
Essential Duties and Responsibilities
- Design and Development
- Lead the design and development of mechanical and/or electrical systems and components for various facilities-related projects.
- Project Management
- Oversee project planning, scheduling, and resource allocation to ensure project completed within specifications, on-time, and within budget.
- Team Leadership
- Mentor junior engineers and maintenance technicians by providing technical guidance and support.
- Technical Documentation
- Prepare and review technical documentation, specifications, reports, and design schematics.
- Compliance and Standards
- Ensure all projects comply with relevant safety, regulatory, and ADI Global Engineering standards. Conduct feasibility studies, root cause analysis, and technical assessments.
- Collaboration
- Work closely with multidisciplinary engineers and teams to integrate mechanical and/or electrical systems into larger projects.
- Troubleshooting
- Identify and resolve complex technical issues, conducting diagnostics and performance evaluations of mechanical systems. Subject matter expert during root cause analysis activities when discussing mechanical and/or electrical systems and delivery.
- Interact with manufacturing engineers and leaders supporting factory growth and optimization.
- Ensure safe practices are leveraged by contractors and technicians when performing maintenance and repairs.
- Driving sustainable methods for operation to conserve utility resources aligning to ADI’s Global Engineering initiatives.
Minimum Qualifications
- BS or MS degree in Mechanical or Electrical Engineering.
- Five (5) years or more experience in a facilities or construction mechanical or electrical engineering role.
- Mechanical Systems:
- HVAC Systems: Chillers/Towers > 900-ton, steam boilers, process cooling, process vacuum, make-up air systems > 50k CFM, return air systems/filtration, humidification systems.
- Motor and pump service, alignment, lubrication, bearing & seal replacements.
- Electrical systems:
- Voltages from control to 480 VAC, Lighting, Variable Frequency Drives, IR scanning and power quality analyzing.
- Proficiency using volt-ohm, amperage, loop & process calibrators and source output meters.
- Control Systems: Building Management Systems, installations, programming, troubleshooting, repair/service including PLC programming, service and troubleshooting.
- Life-safety fire alarm systems: Wet and dry, NFPA inspections / requirements.
- Perform MEP capacity and energy calculations.
- Mechanical Systems:
- Class 1 production area environment.
- Demonstrated proficiency in speaking, reading, writing and understanding the English language
- Must be proficient with Microsoft Excel (formulas & charts) and have good skills with MS Office products.
- Must be able to read schematics (mechanical/electrical) and P&IDs.
- Must be proficient with AutoCAD version MEP2023
- Candidate needs to be self-motivated, safety oriented, have good people skills, be able to multi-task and enjoy working in a fast-paced / fluid environment
- Candidate needs to be thorough and driven to continuously improve systems and processes.
- Strong presentation and technical documentation skills
- Strong organizational skills and the ability to work and lead a team to aggressive schedules.
Preferred Skills, Knowledge and Abilities
- 5-10 years or more experience with semiconductor Facilities such as:
- Toxic Gas systems: ACM, TGM, DOD PS-7 sensors, system integrations, PLC programming and sensor semi-annual gas challenging.
- Proficiency using volt-ohm, amperage, loop & process calibrators and source output meters.
- Siemens “Insight/Apogee/Desigo” building operations & programming.
- Ultra-Pure Water manufacturing: RO/DI.
- Rockwell Automation Control Logix.
For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position – except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) – may have to go through an export licensing review process.
Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group.
EEO is the Law: Notice of Applicant Rights Under the Law.
Job Req Type: ExperiencedRequired Travel: Yes, 10% of the timeShift Type: 1st Shift/DaysThe expected wage range for a new hire into this position is $109,600 to $150,700.Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors.
This position qualifies for a discretionary performance-based bonus which is based on personal and company factors.
This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.
USA Jobs 24 copied this listing from Analog Devices' official careers site on November 4, 2026 and checked it again November 4, 5:17 AM ET. Analog Devices will never ask you to pay to apply or to buy equipment with a check they send you. If anyone does, it is a scam.
Something wrong with this listing? Tell us and we will look into it.
Get software & IT jobs in Massachusetts by email
Similar software & IT jobs in Wilmington, MA
Associate Design Evaluation Engineer
Analog Devices
The Associate Design Evaluation Engineer supports the evaluation, characterization, and validation of semiconductor products throughout the development lifecycle.
- Wilmington, MA
- $71,989–$99,006 a year
Associate Central Applications Engineer
Analog Devices
Working directly with customers to implement our products into their systems
- Wilmington, MA
- $87,188–$119,906 a year
Senior Signal Processing and Algorithm Engineer
Analog Devices
At ADI you will work alongside the brightest minds to collaborate on solving complex problems that matter from autonomous vehicles, drones and factories to augmented reality and remote…
- Somerset, NJ; Wilmington, MA
- $110,385–$151,808 a year
Staff Engineer, Semi Packaging Engineering
Analog Devices
This role will be responsible for the development of advanced packaging solutions for semiconductor devices across various market segments.
- Wilmington, MA
- $113,190–$163,905 a year
Senior Process Sustaining Engineer
Analog Devices
Act as a technical contributor, driving continuous improvement for existing volume manufacturing processes, layers and tools. Working with Equipment and Manufacturing groups to achieve KPIs.
- Wilmington, MA
- $95,600–$131,450 a year