Summary written by USA Jobs 24 from SpaceX's advert and our data on 17,030 current US jobs. How we check every job
At a glance
SpaceX is hiring a Ironworker in Starbase, TX; Brownsville, TX. It is a full-time role in Engineering & Manufacturing, asking for at least 3 years of experience, first listed on November 1. The description mentions AWS. SpaceX has 149 other openings in the US, 30 of them in Starbase, TX. Across all employers on USA Jobs 24 there are 16 Engineering & Mfg openings in Starbase, TX today; the typical one asks for 2 years.
How the pay compares
SpaceX has not published pay for this job, or we could not find it in the advert. Of the 586 engineering & mfg jobs across the US on USA Jobs 24, 49% show pay, and the typical yearly midpoint among them is $112,000. That gives you a fair starting point when the subject comes up.
Skills in this advert
How often each skill named in this advert appears across the 586 engineering & mfg jobs we list today.
Paste your resume and this advert into our resume match tool to see which of these words your resume already covers.
Before you apply
- Check it is still open. We found this job on SpaceX's Greenhouse site on November 1 and checked it again November 4, 5:17 AM ET. When an employer takes a job down, we remove it at our next daily update.
- Check the location works for you. This role is based in Starbase, TX (or one of 1 other locations). If you would need to move, ask whether relocation help is offered.
- Match the experience. The advert asks for at least 3 years of experience. If you are a little short, a close match on the skills in the advert can still win an interview.
- Tailor your resume. Use the advert's own words, such as AWS, wherever they are true for you. Our resume guide shows how.
- Apply only through SpaceX's own site. Our Apply button goes straight to SpaceX's Greenhouse page. If anyone contacts you about this job and asks for money, gift cards or bank details, stop and check it with our scam checker. Read how to spot a fake job offer.
About hiring at SpaceX
SpaceX has 150 openings on USA Jobs 24 today across 7 states. Most are in software & IT (59), engineering & mfg (29) and operations (29). The biggest locations are Brownsville, TX (37), Bastrop, TX (33) and Starbase, TX (31). None of them is fully remote, 26% are open to entry-level candidates and 39% show pay. We collect SpaceX's jobs every day straight from its own careers system (Greenhouse), never from job boards or agencies.
The employer's advert
This is SpaceX's own description of the job, copied word for word from its careers site. We have not edited it.
Show the full advert from SpaceXHide the advert742 words
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
IRONWORKER
Starbase is standing up on-site power generation for the Starbase supercomputer. This ironworker role builds the steel the plant stands on, and the reinforcing in the foundations coming out of the ground. You will erect structural framing, pipe racks, equipment platforms, and selective catalytic reduction (SCR) stack steel, and set the embeds so trailer- and skid-mounted gas turbines, generators, piping, and emissions equipment can land on schedule.
RESPONSIBILITIES:
- Erect structural steel for power generation: turbine and generator support framing, pipe racks, equipment platforms, and SCR stack steel
- Shake out, rig, and connect columns, beams, bracing, and trusses at height; plumb and align members, then bolt up and torque connections per drawings and specs
- Install metal deck, grating, handrail, stairs, ladders, toe boards, and access steel around turbine packages, pipe racks, and stack structures
- Set embed plates, anchor bolts, and bearing surfaces so millwrights can land, level, and grout trailer- and skid-mounted turbine and generator packages
- Place and tie rebar for foundations, equipment pads, and pedestals ahead of each pour
- Read structural, erection, and placing drawings; field-fit miscellaneous iron as directed and flag drawing conflicts before steel is landed
- Rig and signal crane picks of structural members, stack sections, grating, and miscellaneous steel; keep every pick inside the lift plan
- Coordinate bolt-up, grating, and pour windows with millwrights, pipefitters, and concrete so the next craft is not waiting on steel
- Stage, move, and inventory steel, grating, rebar, hardware, and tools; keep laydown yards and work fronts orderly
- Open and close work areas: protection, debris removal, scrap segregation, and end-of-shift reset so the next crew can start immediately
- Follow fall protection, LOTO, PPE, and permit rules; do not work under a suspended load or on live systems without authorization
- Report damaged material, unsafe conditions, and drawing conflicts immediately
BASIC QUALIFICATIONS:
- High school diploma or equivalency certificate
- Completion of a recognized ironworker apprenticeship; OR 3+ years erecting structural steel or placing rebar on industrial or heavy commercial work; OR equivalent military experience
PREFERRED SKILLS AND EXPERIENCE:
- Journey-level ironworker card, NCCER Ironworker, or equivalent credential
- Experience erecting pipe racks, equipment platforms, stack or boiler steel, or other power-generation structures
- Experience setting rebar, embeds, and anchor bolts on heavy equipment foundations
- Qualified rigger and/or crane signalperson (NCCCO, NCCER, or equivalent)
- Current AWS D1.1 structural welding qualification (SMAW and/or FCAW)
- OSHA 10 or equivalent training, including steel-erection fall protection
- Ability to read structural, erection, and rebar drawings and work to a bolt and torque specification
- Prior experience on power plant, data center, industrial, or heavy-civil construction sites
- Strong safety mindset and willingness to follow fall protection, LOTO, and permit rules
- Able to keep picks and pours on schedule alongside millwrights and pipefitters
ADDITIONAL REQUIREMENTS:
- Must be able to work all shifts, overtime and/or weekends as needed
- Must be able to work at heights from structural steel, aerial lifts, and scaffolds
- Able to stand for long periods; climbing, bending, kneeling, crouching, pulling, pushing, stooping, and stretching are required
- Able to lift at least 50 lbs. unassisted
- Must be able to work outdoors in South Texas heat, wind, and rain, and around 19% aqueous ammonia SCR equipment
- Must wear required PPE, including fall protection and respiratory protection when specified
- Able to work under adverse conditions (e.g., dirty, noisy, hot, or at height)
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
USA Jobs 24 copied this listing from SpaceX's official careers site on November 1, 2026 and checked it again November 4, 5:17 AM ET. SpaceX will never ask you to pay to apply or to buy equipment with a check they send you. If anyone does, it is a scam.
Something wrong with this listing? Tell us and we will look into it.
Get engineering & mfg jobs in Texas by email
Similar engineering & mfg jobs in Starbase, TX
BIM Specialist - Mechanical Systems Modeling (Starbase)
SpaceX
Develop, maintain, and upgrade detailed 3D BIM models of mechanical systems (heating, ventilation, air-conditioning, ducting, fans/exhaust, air filtration systems, sensors, controls) using…
- Starbase, TX; Brownsville, TX
- 1+ yrs
New Entry levelBuild Supervisor (Starship)
SpaceX
Supervise shop floor activity, including daily schedules and workflow. Lead and manage a staff of ~30 technicians including all performance management related tasks
- Starbase, TX; Brownsville, TX
- 5+ yrs
NewSupport Technician (Starship) - Temporary
SpaceX
Support tasks associated with tube bending (bend, weld, inspection), support tasks include but are not limited to: cutting, trimming and flaring
- Starbase, TX; Brownsville, TX
- 1+ yrs
New Entry levelApprentice Weld Support Technician
SpaceX
Perform tasks such as: plasma table programming, operating a band saw and chop saw, manually drilling and milling materials, etc.
- Starbase, TX; Brownsville, TX
- 1+ yrs
New InternshipBoilermaker
SpaceX
Fit and weld turbine exhaust duct from the package outlet to the SCR, including spools, expansion joints, dampers, and turning vanes
- Starbase, TX; Brownsville, TX
- 2+ yrs
New