Summary written by USA Jobs 24 from Danaher's advert and our data on 17,030 current US jobs. How we check every job
At a glance
Danaher is hiring a Industrial Maintenance Technician - Electrical (Night Shift) in Deland, FL. It is a full-time role in Engineering & Manufacturing, first listed on November 1. The advertised pay is $28–$35 an hour. Danaher has 99 other openings in the US, 5 of them in Deland, FL. Across all employers on USA Jobs 24 there are 6 Engineering & Mfg openings in Deland, FL today; the typical one asks for 2 years.
How the pay compares
Danaher advertises $28 to $35 an hour, a midpoint of $31.50 an hour. Where an offer lands in a range usually depends on experience and on the exact location. That is higher than about 62% of the 156 engineering & mfg jobs across the US that publish an hourly rate on USA Jobs 24, where the typical midpoint is $28 an hour. At 40 hours a week all year, $31.50 an hour comes to about $66,000 before tax. Convert other hourly rates To see roughly what this leaves after federal and Florida tax, try our take-home pay calculator.
Before you apply
- Check it is still open. We found this job on Danaher's Workday site on November 1 and checked it again November 4, 5:17 AM ET. When an employer takes a job down, we remove it at our next daily update.
- Check the location works for you. This role is based in Deland, FL. If you would need to move, ask whether relocation help is offered.
- Know your number. Decide the lowest offer you would accept before the first call. Our salary negotiation guide explains how to ask for more.
- Apply only through Danaher's own site. Our Apply button goes straight to Danaher's Workday page. If anyone contacts you about this job and asks for money, gift cards or bank details, stop and check it with our scam checker. Read how to spot a fake job offer.
About hiring at Danaher
Danaher has 100 openings on USA Jobs 24 today across 29 states. Most are in engineering & mfg (24), software & IT (18) and sales & BD (12). The biggest locations are Timonium, MD (10), Marlborough, MA (8) and Boston, MA (8). 1% of them are remote, 11% are open to entry-level candidates and 76% show pay. We collect Danaher's jobs every day straight from its own careers system (Workday), never from job boards or agencies.
The employer's advert
This is Danaher's own description of the job, copied word for word from its careers site. We have not edited it.
Show the full advert from DanaherHide the advert622 words
Bring more to life.
Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?
At Pall Corporation, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.
You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.
As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. From airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper—everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. For the exponentially curious, Pall is a place where you can thrive and amplify your impact on the world. Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation.
Learn about the Danaher Business System which makes everything possible.
The Maintenance Technician performs preventative and predictive maintenance on industrial equipment including PLC and CNC machines, reports to the Maintenance Supervisor, is located in Deland, FL and will be an on-site role. Knowledge of single and three (3) phase industrial electricity and power distribution is required. The work hours for this position are Sunday night through Friday morning, 11PM to 7AM plus overtime, as needed. The pay rate for this position is $28 to $35/hour with an additional $1.50 per hour shift differential.
In this role, you will have the opportunity to:
- Perform electrical repairs and installations while following specifications from engineering and equipment manufacturers
- Interface with operators to ensure production equipment readiness and performance
- Perform preventative and predictive maintenance
The essential requirements of the job include:
- High school diploma, GED or equivalent; knowledge of preventative and predictive maintenance concepts
- Minimum of one (1) year of related work experience at journeyman level; demonstrated ability to troubleshoot and repair electrical systems in a manufacturing environment
- Knowledge of single and three (3) phase industrial electricity and power distribution
Travel, Motor Vehicle Record & Physical/Environment Requirements:
- Ability to climb, stand, sit, stoop, bend, walk, reach, squat, kneel, push, and pull for a minimum of 8 hours per day.
- Ability to lift, move or carry equipment up to 50lbs
It would be a plus if you also possess previous experience in:
- Working with steel microfibers
- CNC, PLC and low voltage controls
- Technical certificate, apprenticeship, or military equivalent preferred
Join our winning team today. Together, we’ll accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life.
For more information, visit www.danaher.com.
Danaher Corporation and all Danaher Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law.
The U.S. EEO posters are available here.
For candidates who are based outside of New York City or who are applying for roles outside of New York City, for more information about conditions of any job offer please click here.
We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact:1-202-419-7762 or applyassistance@danaher.com.
USA Jobs 24 copied this listing from Danaher's official careers site on November 1, 2026 and checked it again November 4, 5:17 AM ET. Danaher will never ask you to pay to apply or to buy equipment with a check they send you. If anyone does, it is a scam.
Something wrong with this listing? Tell us and we will look into it.
Get engineering & mfg jobs in Florida by email
Similar engineering & mfg jobs in Deland, FL
Lead Tooling Technician - 1st Shift
Cardinal Health
Plans method and sequence of work for CNC machining operations by utilizing programming software through post processors or programming at the machine.
- Deland, FL
- $23.80–$37.18 an hour
Manufacturing Set Up Technician (Plastics) - 2nd Shift (Sun - Thu)
Cardinal Health
The role of the Technician I, Product Test & Calibration is to set-up, maintain, operate, test and inspect product, and perform repairs on equipment in compliance to finished product…
- Deland, FL
- $19.45 an hour
Entry levelProduction Associate – 2nd shift – 3:10pm-1:10am – Mon-Thurs
Danaher
Setup and operate all equipment in a related area to produce complicated components, subassemblies, and final assemblies from blueprints and work instructions
- Deland, FL
Production Operator-2nd Shift-3:10p.m. to 1:10a.m., Monday-Thursday
Danaher
Draw wire on machines designed for this process. Utilize procedures for specific die drafts to complete the correct diameter of wire.
- Deland, FL
- 2+ yrs
Production Associate II 1st Shift – 4:50am-3:20pm – Mon-Thur
Danaher
Setup and operate all equipment in a related area to produce complicated components, subassemblies, and final assemblies from blueprints and work instructions.
- Deland, FL