Summary written by USA Jobs 24 from GE HealthCare's advert and our data on 17,030 current US jobs. How we check every job
At a glance
GE HealthCare is hiring a Electronics Technician (1st Shift - M-F 6:15 AM – 3:00 PM) in Salt Lake City, UT. It is a full-time role in Engineering & Manufacturing, asking for at least 2 years of experience, first listed on November 1. The description mentions Workday. GE HealthCare has 79 other openings in the US, 2 of them in Salt Lake City, UT. Across all employers on USA Jobs 24 there are 4 Engineering & Mfg openings in Salt Lake City, UT today; the typical one asks for 2 years and advertises about $56,000 a year at the midpoint.
How the pay compares
GE HealthCare has not published pay for this job, or we could not find it in the advert. Of the 586 engineering & mfg jobs across the US on USA Jobs 24, 49% show pay, and the typical yearly midpoint among them is $112,000. That gives you a fair starting point when the subject comes up.
Skills in this advert
How often each skill named in this advert appears across the 586 engineering & mfg jobs we list today.
Paste your resume and this advert into our resume match tool to see which of these words your resume already covers.
Before you apply
- Check it is still open. We found this job on GE HealthCare's Workday site on November 1 and checked it again November 4, 5:17 AM ET. When an employer takes a job down, we remove it at our next daily update.
- Check the location works for you. This role is based in Salt Lake City, UT. If you would need to move, ask whether relocation help is offered.
- Match the experience. The advert asks for at least 2 years of experience. If you are a little short, a close match on the skills in the advert can still win an interview.
- Tailor your resume. Use the advert's own words, such as Workday, wherever they are true for you. Our resume guide shows how.
- Apply only through GE HealthCare's own site. Our Apply button goes straight to GE HealthCare's Workday page. If anyone contacts you about this job and asks for money, gift cards or bank details, stop and check it with our scam checker. Read how to spot a fake job offer.
About hiring at GE HealthCare
GE HealthCare has 80 openings on USA Jobs 24 today across 7 states. Most are in software & IT (19), healthcare & pharma (13) and engineering & mfg (11). The biggest locations are Waukesha, WI (20), Chicago, IL (5) and Salt Lake City, UT (3). 55% of them are remote, 1% are open to entry-level candidates and 44% show pay. We collect GE HealthCare's jobs every day straight from its own careers system (Workday), never from job boards or agencies.
The employer's advert
This is GE HealthCare's own description of the job, copied word for word from its careers site. We have not edited it.
Show the full advert from GE HealthCareHide the advert651 words
Job Description Summary
This role performs diverse and complex assignments in support of GE HealthCare product development and manufacturing. Assignments may include but are not limited to:• Set up and running of data acquisition equipment for tests
• Reporting/documenting results of tests and measures
GE HealthCare is a leading global medical technology and digital solutions innovator. Our mission is to improve lives in the moments that matter. Unlock your ambition, turn ideas into world-changing realities, and join an organization where every voice makes a difference, and every difference builds a healthier world.
At our Salt Lake City site, engineering, research, and manufacturing teams come together to design and build surgical imaging technologies — including advanced C-arm imaging systems that support image-guided procedures for clinicians across the globe. The work here contributes to the precision and capability clinicians bring into the OR every day.
Job Description
Essential Responsibilities
Test production/Refurb assemblies/systems for correct operation and compliance to performance specifications.
Ability to demonstrate proficiency using a Digital Multimeter, Oscilloscope, and Power Supplies.
Perform electrical calibration on production/refurb systems and subassemblies.
Interfaces with other departments in the execution of duties to ensure the orderly flow of material and information.
Execute training plans.
Perform basic trouble shooting encompassing multiple variables and unknowns to achieve root cause analysis and problem resolution. Conduct diagnostic tests, as required to draw conclusions.
Interpret circuit board schematics/system interconnect diagrams.
Utilize basic technical communications throughout the test process for production/Refurb assemblies/systems.
Provide evaluation/constructive feedback in the development of internal and external engineering, manufacturing, or service documentation.
Provide strong individual contributions to team goals.
Participate in LEAN process improvement activities to improve quality, process flow, and cycle or TAKT times.
Comply with EHS regulations and policies and escalate concerns/suggestions to leadership.
Maintain daily production output.
Identify and report defects in assigned area.
Engage in daily 5s activities.
Required Qualifications
Associates degree in an Electronics or Engineering field, or a technical certificate from a qualifying school with at least 25 credit hours in electronics including classes in electronics assembly, DC/AC/analog electronics, digital fundamentals, troubleshooting, and instrumentation, or a High School diploma and 2 years Electronics experience.
Proficiency to logically troubleshoot at subsystem and system level, using identifiable problem-solving techniques
Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process
Must be able to physically lift (floor to waist, waist to crown level, and horizontally)
Lift and carry up to 35 lbs. (Anything over 35 lbs. requires assistance.)
Must be able to perform frequent simple grasping, firm grasping, fine manipulation, neck rotation, and neck flexion frequently throughout the workday
Must be able to twist, push/pull, reach at, above and below shoulder height frequently throughout the workday
Must be able to frequently stoop, bend, squat and kneel throughout the workday
Must be able to stand/sit continuously throughout the day
Must be able to ascend/descend/balance occasionally on portable step stools
Desired Characteristics
Bachelor’s degree in manufacturing, Engineering or Technology related fields.
Experience in medical manufacturing or other highly regulated industry preferred.
#LI-ONSITE
#LI-NS2
We will not sponsor individuals for employment visas, now or in the future, for this job opening.

Additional Information
GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).
While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees.
Relocation Assistance Provided: No
USA Jobs 24 copied this listing from GE HealthCare's official careers site on November 1, 2026 and checked it again November 4, 5:17 AM ET. GE HealthCare will never ask you to pay to apply or to buy equipment with a check they send you. If anyone does, it is a scam.
Something wrong with this listing? Tell us and we will look into it.
Get engineering & mfg jobs in Utah by email
Similar engineering & mfg jobs in Salt Lake City, UT
Quality Inspector II
Medtronic
You'll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world. This Inspector II role supports Quality operations by helping ensure incoming…
- Salt Lake City, UT
- $44,800–$67,200 a year
Entry levelProduction Line Lead - 3rd Shift
Mars
Coordinates the activities of assigned team members on matters related to: production, such as the quality and safety of food products being packaged; the safety of team members; the ongoing…
- Salt Lake City, UT
PLC Controls Technician
Mars
PLC Technician, Automation Technician, Controls Technician, Industrial Automation Technician, PLC Programmer, Electrical Technician, Maintenance Technician - PLC, Automation Engineer
- Salt Lake City, UT